The TDA2006 is a monolithic integrated circuit in Pent a watt package, intended for use as a low frequency class”AB” amplifier. At ±12V,d = 10 % typically it provides12W output power on a 4Ω load and 8W on a 8Ω . The TDA2006 provides high output current and has very low harmonic and cross-over distortion. Further the device incorporates an original (and patented) short circuit protection system comprising an arrangement for automatically limiting the dissipated power so as to keep the working point of the output transistors within their safe operating area. A conventional thermal shutdown system is also included. The TDA2006 is pin to pin equivalent to theTDA2030.
Pin Connection
PRACTICALCONSIDERATIONS
Printed Circuit Board
The layout shown in Figure should be adopted by the designers. If different layout are used, the ground points of input 1 and input 2 must be well decoupled from ground of the output on which a
rather high current flows.
Assembly Suggestion
No electrical isolation is needed between the package and the heat-sink with single supply voltage
configuration.
Application Suggestion
The recommended values of the components are the ones show non application circuits of Figure Above. Different values can be used.The table1 can help the designers.
Table 1 :
Download Datasheet TDA2006
No comments:
Post a Comment